DIFFERENTIAL RING AND PINION FOR GM 9.25" AND GM 11.5" - RING AND PINIONS INCLUDING TIMKEN BEARING KITS; 4.56 RATIO
Motive Gear offers some of the toughest drive train components on the market today. If you are looking for the largest line of performance ring and pinion gear options available with gear sets in a wide range of ratios for nearly every application, both on and off-road, check out Motive Gear. Motive Gear products can be found in the winner's circle at racing events worldwide. The superior quality of Motive Gear components is the result of years of racing development, outstanding design and state-of-the-art manufacturing methods. Extensive testing is performed on all products by our in-house engineers.
- GM 3500 2001-2010 GM9.25F/GM11.5 4.56
Information:
GM 3500 2001-2010 GM9.25F/GM11.5 4.56
Application Summary:
| Year |
Make/Model |
| 2001-2004 |
Chevrolet Silverado 2500 |
| 2007-2009 |
Chevrolet Silverado 2500 |
| 2001-2010 |
Chevrolet Silverado 2500 HD |
| 2007 |
Chevrolet Silverado 2500 HD Classic |
| 2001-2006 |
Chevrolet Silverado 3500 |
| 2007 |
Chevrolet Silverado 3500 Classic |
| 2007-2010 |
Chevrolet Silverado 3500 HD |
| 2001-2004 |
GMC Sierra 2500 |
| 2002-2010 |
GMC Sierra 2500 HD |
| 2002-2006 |
GMC Sierra 3500 |
| 2007 |
GMC Sierra 3500 Classic |
| 2007-2010 |
GMC Sierra 3500 HD |
| Attributes |
| App/Model |
GM 11.5, GM 9.25 IFS |
| California Proposition 65 |
WARNING: Cancer - www.P65Warnings.ca.gov |
| Country of Origin (Primary) |
US |
| Cover Bolt Quantity |
10 Front (G895456IFS), 14 Rear (GM11.5-456), 10 Front (G895456IFS), 14 Rear (GM11.5-456) |
| Differential Case Design Type |
GM 9.25, GM 11.5, GM 11.5, GM 9.25 IFS |
| Emission Code |
Legal US |
| Gear Ratio |
4.56 |
| Harmonized Tariff Code (Schedule B) |
8708990011 |
| Hazardous Material Code |
N |
| Life Cycle Status Code |
Available to Order |
| NAFTA Preference Criterion Code |
B |
| Pinion Gear Tooth Quantity |
9, 9 |
| Pinion Shaft Diameter |
1.876 Front (G895456IFS), 2.005 Rear (GM11.5-456), 1.876 Front (G895456IFS), 2.005 Rear (GM11.5-456) |
| Pinion Spline Count |
30, 30 |
| Position |
Front and Rear |
| Ratio |
4.56 |
| Ring and Pinion Gear Ratio |
4.56 |
| Ring Gear Bolt Quantity |
12, 12 |
| Ring Gear Diameter |
9.25 Front (G895456IFS), 11.5 Rear (GM11.5-456) |
| Ring Gear Material |
8620 Steel, 8620 Steel |
| Ring Gear Outside Diameter |
11.5 Rear (GM11.5-456), 9.25 Front (G895456IFS) |
| Ring Gear Rotation |
Reverse Front (G895456IFS), Standard Rear (GM11.5-456), Reverse Front (G895456IFS), Standard Rear (GM11.5-456) |
| Ring Gear Tooth Quantity |
41, 41 |
| SDR Required Flag |
N |
| Taxonomy A |
LD Differential, LD Differential |
| Taxonomy B |
Ring and Pinion Gear Packages, Ring and Pinion Gear Packages |
| Taxonomy C |
Front and Rear, Front and Rear |
| Taxonomy D |
4.56, 4.56 |
| GTIN |
00698231099896 |
