DIFFERENTIAL RING AND PINION FOR GM 8.25" IFS AND GM 8.5" - RING AND PINIONS INCLUDING TIMKEN BEARING KITS; 4.11 RATIO; REQUIRES 3.42 AND HIGHER FRONT CARRIER; REQUIRES 2.73 AND HIGHER REAR CARRIER
Motive Gear offers some of the toughest drive train components on the market today. If you are looking for the largest line of performance ring and pinion gear options available with gear sets in a wide range of ratios for nearly every application, both on and off-road, check out Motive Gear. Motive Gear products can be found in the winner's circle at racing events worldwide. The superior quality of Motive Gear components is the result of years of racing development, outstanding design and state-of-the-art manufacturing methods. Extensive testing is performed on all products by our in-house engineers.
- GM 1500 1999-2008 GM8.25F/GM8.5R 4.11
Information:
GM 1500 1999-2008 GM8.25F/GM8.5R 4.11
Application Summary:
| Year |
Make/Model |
| 2002-2008 |
Cadillac Escalade |
| 2003-2008 |
Cadillac Escalade ESV |
| 2002-2008 |
Cadillac Escalade EXT |
| 2007-2008 |
Chevrolet Avalanche |
| 2002-2006 |
Chevrolet Avalanche 1500 |
| 1999-2008 |
Chevrolet Silverado 1500 |
| 2007 |
Chevrolet Silverado 1500 Classic |
| 2001-2002 |
Chevrolet Silverado 1500 HD |
| 2000-2008 |
Chevrolet Suburban 1500 |
| 2000-2008 |
Chevrolet Tahoe |
| 1999-2008 |
GMC Sierra 1500 |
| 2000-2008 |
GMC Yukon |
| 2000-2008 |
GMC Yukon XL 1500 |
| Attributes |
| App/Model |
GM 8.25 IFS, GM 8.625 |
| California Proposition 65 |
WARNING: Cancer - www.P65Warnings.ca.gov |
| Country of Origin (Primary) |
US |
| Cover Bolt Quantity |
10, 10 |
| Differential Carrier Break |
2.73 Ratio and Higher Rear (GM10-411), 3.42 Ratio and Higher Front (G885411IFS), 2.73 Ratio and Higher Rear (GM10-411), 3.42 Ratio and Higher Front (G885411IFS) |
| Differential Case Design Type |
GM 8.25 IFS, GM 8.625, GM 8.25 IFS, GM 8.625 |
| Emission Code |
Legal US |
| Gear Ratio |
4.11 |
| Harmonized Tariff Code (Schedule B) |
8708990011 |
| Hazardous Material Code |
N |
| Life Cycle Status Code |
Available to Order |
| NAFTA Preference Criterion Code |
B |
| Pinion Gear Tooth Quantity |
9 Front (G885411IFS), 10 Rear (GM10-411), 10 Rear (GM10-411), 9 Front (G885411IFS) |
| Pinion Shaft Diameter |
1.626, 1.626 |
| Pinion Spline Count |
30, 30 |
| Position |
Front and Rear |
| Ratio |
4.11 |
| Ring and Pinion Gear Ratio |
4.11 |
| Ring Gear Bolt Quantity |
10, 10 |
| Ring Gear Diameter |
8.25 Front (G885411IFS), 8.5 Rear (GM10-411) |
| Ring Gear Material |
8620 Steel, 8620 Steel |
| Ring Gear Outside Diameter |
8.25 Front (G885411IFS), 8.5 Rear (GM10-411) |
| Ring Gear Rotation |
Reverse Front (G885411IFS), Standard Rear (GM10-411), Reverse Front (G885411IFS), Standard Rear (GM10-411) |
| Ring Gear Tooth Quantity |
37 Front (G885411IFS), 41 Rear (GM10-411), 37 Front (G885411IFS), 41 Rear (GM10-411) |
| SDR Required Flag |
N |
| Taxonomy A |
LD Differential, LD Differential |
| Taxonomy B |
Ring and Pinion Gear Packages, Ring and Pinion Gear Packages |
| Taxonomy C |
Front and Rear, Front and Rear |
| Taxonomy D |
4.11, 4.11 |
| GTIN |
00698231098721 |
