DIFFERENTIAL RING AND PINION FOR FRONT DANA 30 AND REAR CHRYSLER 8.25 - RING AND PINIONS INCLUDING TIMKEN BEARING KITS; 4.56 RATIO; REQUIRES 3.73 AND HIGHER CARRIER; IF CURRENTLY USING A 3.07 OR 3.54 RATIO YOU WILL NEED TO PURCHASE A NEW FR
Motive Gear offers some of the toughest drive train components on the market today. If you are looking for the largest line of performance ring and pinion gear options available with gear sets in a wide range of ratios for nearly every application, both on and off-road, check out Motive Gear. Motive Gear products can be found in the winner's circle at racing events worldwide. The superior quality of Motive Gear components is the result of years of racing development, outstanding design and state-of-the-art manufacturing methods. Extensive testing is performed on all products by our in-house engineers.
- DIFFERENTIAL RING & PINION FOR FRONT DANA 30 & REAR CHRYSLER 8.25 - RING & PINIONS INCLUDING TIMKEN BEARING KITS
- 4.56 RATIO
- REQUIRES 3.73 & HIGHER CARRIER
- IF CURRENTLY USING A 3.07 OR 3.54 RATIO YOU WILL NEED TO PURCHASE A NEW FRONT CARRIER
Information:
DIFFERENTIAL RING & PINION FOR FRONT DANA 30 & REAR CHRYSLER 8.25 - RING & PINIONS INCLUDING TIMKEN BEARING KITS; 4.56 RATIO; REQUIRES 3.73 & HIGHER CARRIER; IF CURRENTLY USING A 3.07 OR 3.54 RATIO YOU WILL NEED TO PURCHASE A NEW FRONT CARRIER
Application Summary:
| Year |
Make/Model |
| 1991-2000 |
Jeep Cherokee |
| Attributes |
| App/Model |
Chrysler 8.25, Dana 30 Reverse |
| California Proposition 65 |
WARNING: Cancer - www.P65Warnings.ca.gov |
| Country of Origin (Primary) |
US |
| Cover Bolt Quantity |
10, 10 |
| Differential Carrier Break |
2.71 Ratio and Higher Rear (C8.25-456), 3.73 Ratio and Higher Front (D30-456F), 2.71 Ratio and Higher Rear (C8.25-456), 3.73 Ratio and Higher Front (D30-456F) |
| Differential Case Design Type |
Dana 30, Chrysler 8.25, Chrysler 8.25 (C213R/C213RE), Dana 30 Reverse |
| Emission Code |
Legal US |
| Front Differential Carrier Break |
3.73 and Higher |
| Gear Ratio |
4.56 |
| Harmonized Tariff Code (Schedule B) |
8708990011 |
| Hazardous Material Code |
N |
| Life Cycle Status Code |
Available to Order |
| NAFTA Preference Criterion Code |
B |
| Pinion Gear Tooth Quantity |
9, 9 |
| Pinion Shaft Diameter |
1.375 Front (D30-456F), 1.626 Rear (C8.25-456), 1.375 Front (D30-456F), 1.626 Rear (C8.25-456) |
| Pinion Spline Count |
26 Front (D30-456F), 27 Rear (C8.25-456), 26 Front (D30-456F), 27 Rear (C8.25-456) |
| Position |
Front and Rear |
| Ratio |
4.56 |
| Rear Differential Carrier Break |
2.71 and Higher |
| Ring and Pinion Gear Ratio |
4.56 |
| Ring Gear Bolt Quantity |
10, 10 |
| Ring Gear Diameter |
7.125 Front (D30-456F), 8.25 Rear (C8.25-456) |
| Ring Gear Material |
8620 Steel, 8620 Steel |
| Ring Gear Outside Diameter |
7.125 Front (D30-456F), 8.25 Rear (C8.25-456) |
| Ring Gear Rotation |
Reverse Front (D30-456F), Standard Rear (C8.25-456), Reverse Front (D30-456F), Standard Rear (C8.25-456) |
| Ring Gear Tooth Quantity |
41, 41 |
| SDR Required Flag |
N |
| Taxonomy A |
LD Differential, LD Differential |
| Taxonomy B |
Ring and Pinion Gear Packages, Ring and Pinion Gear Packages |
| Taxonomy C |
Front and Rear, Front and Rear |
| Taxonomy D |
4.56, 4.56 |
| GTIN |
00698231498026 |
