Nitro Black Extreme Load Mechanical Tie-Bar Roller Lifters For Big Block Ford 429 / 460 Engines On Center Pushrod Seat With .903 Inch Body And .810 Inch Roller Wheel
The Nitro Black Mechanical Lifters Are Made From A Billet Body With A Pinned Axle And Have 9000 + Rpm Capability. The Nitro Black Lifters Have An Axle Diameter Of .470 Inch With Full Time Pressurized Oiling. The Nitro Black Lifter Series Has Diamond-Like Coating (Dlc) For Less Friction And Wear Durability. These Lifters Have The Carrying Capacity Of A 1 Inch Lifter. This Series Is Recommended For All Aluminum Block Applications That Do Not Have Lifter Bore Bushings. These Lifters Have A .750 Inch Diameter Roller Wheel For .842 Inch Body Lifters And A .810 Inch Roller For .903 Inch Body Lifters And .850 Inch For .936 Inch Body Lifters. These Lifters Have A Special Break-In Lube Between The Axle And Roller Wheel And Should Not Be Washed With Solvent Prior To Installation. These Lifters Also Require A Break-In Period Of 25-30 Minutes Varying The Rpm From 1800-2200 Rpm. Recommended Spring Pressure 150-400 Lbs Seat Pressure 550-1000 Lbs Open Pressure
The Nitro Black Mechanical Lifters Are Made From A Billet Body With A Pinned Axle And Have 9000 + Rpm Capability. The Nitro Black Lifters Have An Axle Diameter Of .470 Inch With Full Time Pressurized Oiling. The Nitro Black Lifter Series Has Diamond-Like Coating (Dlc) For Less Friction And Wear Durability. These Lifters Have The Carrying Capacity Of A 1 Inch Lifter. This Series Is Recommended For All Aluminum Block Applications That Do Not Have Lifter Bore Bushings. These Lifters Have A .750 Inch Diameter Roller Wheel For .842 Inch Body Lifters And A .810 Inch Roller For .903 Inch Body Lifters And .850 Inch For .936 Inch Body Lifters. These Lifters Have A Special Break-In Lube Between The Axle And Roller Wheel And Should Not Be Washed With Solvent Prior To Installation. These Lifters Also Require A Break-In Period Of 25-30 Minutes Varying The Rpm From 1800-2200 Rpm. Recommended Spring Pressure 150-400 Lbs Seat Pressure 550-1000 Lbs Open Pressure
- Billet Body With Pinned Axle And 9000 + RPM Capability
- Special Break-In Lube Between The Axle And Roller Wheel Should Not Be Washed With Solvent Prior To Installation
- These Lifters Have The Carrying Capacity Of A 1 Inch Diameter Lifter
- Diamond-Like Coating (DLC) For Less Friction, Wear And Durability
- Lifters Are Rebuildable
- Made In USA
- Recommended Spring Pressure 150-400 Lbs Seat Pressure And 550-1000 Lbs Open Pressure
- Requires A Break-In Period Of 25-30 Minutes Varying The RPM From 1800-2200 RPM
- Revolutionary Oil Wedge Design
- Special B624l Matrix Material Axle That Is .470 Inch Diameter With Full Time Pressurized Oiling
Information:
Note: All Lifters With A Tie-Bar Are Designed To Be Installed In Either Retro-Fit Engines Or Engines Originally Equipped With Roller Lifters| Attributes | |
| Country of Origin (Primary) | US |
| Hazardous Material Code | N |
| Life Cycle Status Code | Available to Order |
| Recommended Spring Open Pressure | 550-1000 |
| Recommended Spring Seat Pressure | 150-400 |
| Roller Diameter | .810 |
| RPM Capability | 9000+ |
| SDR Required Flag | N |
| GTIN | 00846163125200 |