Ultra Series Bushing Style Mechanical Roller Lifters For Small Block Ford 289 To 351W With Pushrod Seat On Center With A .936 Body And .850 Roller Wheel
Engine Pro's Ultra Bushing Series Mechanical Roller Lifters Are Made From A Billet Body With A Clipped Axle And Support 8000 + Rpm Capability. Features Pressurized Oiling To The Rollers And Recommended For Spring Pressures Of 250-350 Lbs Seat Pressure And 600-850 Lbs Of Open Pressure. Lifters Feature A Special Break-In Lube Between The Axle And The Roller Wheel That Should Not Be Washed With Solvent Prior To Installation. Requires A Break-In Period Of 25-30 Minutes Varying The Rpm From 1800-2200 Rpm
Engine Pro's Ultra Bushing Series Mechanical Roller Lifters Are Made From A Billet Body With A Clipped Axle And Support 8000 + Rpm Capability. Features Pressurized Oiling To The Rollers And Recommended For Spring Pressures Of 250-350 Lbs Seat Pressure And 600-850 Lbs Of Open Pressure. Lifters Feature A Special Break-In Lube Between The Axle And The Roller Wheel That Should Not Be Washed With Solvent Prior To Installation. Requires A Break-In Period Of 25-30 Minutes Varying The Rpm From 1800-2200 Rpm
- Made From A Billet Body With A Clipped Axle And Have 8000 + RPM Capability
- Made In USA
- Recommended Spring Pressure 250-350 Lbs Seat Pressure And 600-850 Lbs Open Pressure
- Requires A Break-In Period Of 25-30 Minutes Varying The RPM From 1800-2200 RPM
- Special Break-In Lube Between The Axle And Roller Wheel Should Not Be Washed With Solvent Prior To Installation
Information:
Note: All Lifters With A Tie-Bar Are Designed To Be Installed In Either Retro-Fit Engines Or Engines Originally Equipped With Roller Lifters| Attributes | |
| Country of Origin (Primary) | US |
| Hazardous Material Code | N |
| Life Cycle Status Code | Available to Order |
| Recommended Spring Open Pressure | 600-850 |
| Recommended Spring Seat Pressure | 250-350 |
| Roller Diameter | .850 |
| RPM Capability | 8000+ |
| SDR Required Flag | N |
| GTIN | 00846163104007 |