Clevite H-Series performance bearings have a medium level of eccentricity, high crush, and a hardened steel back and thin overlay. These bearings are made without flash plating for better seating. Use H-Series bearings with crankshafts that have oversize fillets and where engines run in the medium to high RPM range.
Application Summary:
| Year | Make/Model |
|---|---|
| 1959-1971 | Chrysler 300 |
| 1975-1978 | Chrysler Cordoba |
| 1959-1975 | Chrysler Imperial |
| 1959-1978 | Chrysler New Yorker |
| 1959-1978 | Chrysler Newport |
| 1959-1960 | Chrysler Saratoga |
| 1959-1977 | Chrysler Town & Country |
| 1959-1961 | Chrysler Windsor |
| 1961 | DeSoto DeSoto |
| 1963-1964 | Dodge 330 |
| 1963-1964 | Dodge 440 |
| 1962-1965 | Dodge 880 |
| 1974 | Dodge B100 Van |
| 1975-1978 | Dodge B200 |
| 1971-1974 | Dodge B200 Van |
| 1975-1978 | Dodge B300 |
| 1972-1974 | Dodge B300 Van |
| 1976-1979 | Dodge CB300 |
| 1970-1974 | Dodge Challenger |
| 1966-1978 | Dodge Charger |
| 1958-1959 | Dodge Coronet |
| 1965-1976 | Dodge Coronet |
| 1958-1961 | Dodge Custom |
| 1975-1978 | Dodge D100 |
| 1968-1974 | Dodge D100 Pickup |
| 1967 | Dodge D100 Series |
| 1977-1978 | Dodge D150 |
| 1975-1978 | Dodge D200 |
| 1968-1974 | Dodge D200 Pickup |
| 1967 | Dodge D200 Series |
| 1975-1978 | Dodge D300 |
| 1968-1974 | Dodge D300 Pickup |
| 1967 | Dodge D300 Series |
| 1978 | Dodge D400 |
| 1978 | Dodge D450 |
| 1960-1962 | Dodge Dart |
| 1967-1969 | Dodge Dart |
| 1958-1959 | Dodge Lancer |
| 1961 | Dodge Lancer |
| 1974 | Dodge M300 |
| 1978 | Dodge Magnum |
| 1960 | Dodge Matador |
| 1974 | Dodge MB300 |
| 1965-1978 | Dodge Monaco |
| 1960-1961 | Dodge Phoenix |
| 1961 | Dodge Pioneer |
| 1960-1973 | Dodge Polara |
| 1974-1978 | Dodge Ramcharger |
| 1958-1959 | Dodge Royal |
| 1975-1977 | Dodge Royal Monaco |
| 1961 | Dodge Seneca |
| 1958-1959 | Dodge Sierra |
| 1958 | Dodge Suburban |
| 1975-1977 | Dodge W100 |
| 1968-1974 | Dodge W100 Pickup |
| 1967 | Dodge W100 Series |
| 1977-1978 | Dodge W150 |
| 1975-1978 | Dodge W200 |
| 1968-1974 | Dodge W200 Pickup |
| 1967 | Dodge W200 Series |
| 1975-1978 | Dodge W300 |
| 1968-1974 | Dodge W300 Pickup |
| 1967 | Dodge W300 Series |
| 1963 | Jensen C-V8 |
| 1964 | Plymouth Barracuda |
| 1967-1972 | Plymouth Barracuda |
| 1958-1970 | Plymouth Belvedere |
| 1965-1967 | Plymouth Belvedere II |
| 1970-1972 | Plymouth Cuda |
| 1958-1961 | Plymouth Custom |
| 1960-1963 | Plymouth Fleet Special |
| 1958-1978 | Plymouth Fury |
| 1968-1974 | Plymouth Fury I |
| 1965-1966 | Plymouth Fury II |
| 1968-1974 | Plymouth Fury II |
| 1965-1974 | Plymouth Fury III |
| 1972-1977 | Plymouth Gran Fury |
| 1967-1971 | Plymouth GTX |
| 1976-1978 | Plymouth PB200 |
| 1974 | Plymouth PB200 Van |
| Attributes | |
| Alternate Part Number | CB527HND |
| Bearing Item Grade | High Performance |
| Bearing Material | TM-77 |
| Bearing Note | Narrowed On One Side For Increased Crank Fillet Clearance |
| Bearing O.D. or Housing Bore (max.) | 2.5005 |
| Bearing O.D. or Housing Bore (min.) | 2.5000 |
| Bearing Series | H |
| California Proposition 65 | No |
| Country of Origin (Primary) | US |
| Harmonized Tariff Code (Schedule B) | 8483308090 |
| Hazardous Material Code | N |
| Life Cycle Status Code | Available to Order |
| Max. Length | 0.8620 |
| Max. Wall | 0.0622 |
| Meets or Exceeds Original Equipment Manufacture Specifications | Yes |
| NAFTA Preference Criterion Code | B |
| SDR Required Flag | N |
| Size | Standard |
| Standard Shaft Diameter (max.) | 2.3750 |
| Standard Shaft Diameter (min.) | 2.3740 |
| Unit of Measure | Inches |
| Vertical Oil Clearance (max.) | 0.0026 |
| Warranty Time | 12 |
| GTIN | 00027067536921 |